3500mah 11.1v 30C 3S Build Power Lipo Battery
This 3 cell build power lipo battery with 3500mah of capacity and 30C of discharge rate comes with two Connector XT60 and T-Plug. This lipo battery is compatible with all types of DIY drone or Multi-Rotor.
Features:
- Thick 12AWG Discharge Leads
- True Capacity and C-Rating
- XT60 and T-Plug Connector(Choose while purchase)
- JST-XH Balance connector
Specifications:
- Capacity: 3500mAh
- Voltage: 3S / 3 Cell / 11.1v
- Discharge Rate: 30C Constant (105A)
- Charge Rate: 2C (7.0A)
- Watt Hours: 38.85Wh
- Apporx Weight: 7.2 oz / 206g (including wire & plug)
- Dimensions LxWxH: 100.0 x 34.0 x 27.2 mm *Note that dimensions may vary
- Discharge Plug: XT60 Connector or T-Plug
- Balance Plug: JST-XH
Caution:
- Don’t over-charge, or over-discharge batteries.
- Don’t put it beside the high-temperature condition.
- Don’t throw it into the fire.
- Don’t throw it into water.
₹2,799.00
- Capacity: 3500mAh
- Voltage: 3S / 3 Cell / 11.1v
- Discharge Rate: 30C Constant (105A)
- Charge Rate: 2C (7.0A)
- Watt Hours: 38.85Wh
- Apporx Weight: 7.2 oz / 206g (including wire & plug)
- Dimensions LxWxH: 100.0 x 34.0 x 27.2 mm *Note that dimensions may vary
- Discharge Plug: XT60 Connector or T-Plug
- Balance Plug: JST-XH
Based on 0 reviews
Be the first to review “3500mah 11.1v 30C 3S Build Power Lipo Battery”
Related products
-
Flight Controller, Multirotor
openpilot CC3D evo Flight Controller Stm32 For RC Drone Fpv Racing
-
CC3D EVO CopterControl Hardware Features
Powerful STM32 32-bit microcontroller running at 90MIPs with 128KB Flash and 20KB RAM.
3-axis high-performance MEMs gyros and 3-axis high-performance MEMs accelerometer.
Tiny 36mmx36mm 4 layer PCB for superior electrical noise reduction and flight performance.
Software support for Windows, Mac and Linux.
Direct high speed USB support with no drivers required, a truly plug and play device.
Spektrum satellite receiver support.
Futaba S-BUS hardware support.
Innovative Flexi-port technology for superior port flexibility.
4Mbits on-board EEPROM for configuration storage.Flexiport
CopterControl also offers the innovative Flexi-port which provides either I2C connectivity or a second serial port. Flexi-port gives CopterControl the flexibility to use either I2C
and a single serial port or dual serial ports, according to your connectivity needs.Superior user experience
OpenPilot has tried to make your experience with the CC3D as easy and trouble-free as possible. Naturally for a high-end product, the hardware is complete; there is nothing to solder. The included RC harness allows you to connect any standard PWM receiver. All CopterControl boards are tested before shipping and come with bootloader already flashed. A standard mini-USB cable (not included) is used to load the latest firmware and configure everything for your unique airframe.The OpenPilot project, whist still young, it trying to make Open Source much more user friendly. OpenPilot software is designed to be used by everybody! All major operating systems are supported and install packages are provided. The software is all Free software under the GPLv3 license and not only are you welcome to hack it, but we encourage it!
Sensors and Components
3-axis Gupports several common RC inputs: 6 PWM channels, combined PPM, Spektrum/JR DSM2,
Supports several common RC inputs: 6 PWM channels, combined PPM, Spektrum/JR DSM2, DSMJ, DSMX satellites, and Futaba S.Bus receivers.
Simultaneous support for multiple receivers.
ReceiverPort functions (configurable): 6 PWM input channels or combined PPM stream, 4 PWM output channels
MainPort functions (configurable): serial telemetry (default), GPS, S.Bus, Spektrum/JR satellites
FlexiPort (configurable): serial telemetry, GPS, Spektrum/JR satellites, or I2C peripherals (under development)
10 PWM outputs to servos or ESC’s, or for camera stabilization
Camera stabilization: supports up to 3-axis camera mounts with stabilization and manual control from any of configured receivers.
Onboard USB connectivity for easy configuration.
USB and serial telemetry and configuration
Supported by powerful OpenPilot GCS
4 Mbit onboard memory
3C Quaternion based complementary filter running at 500HzPackage included:
1 x CC3D EVO Flight Controller And Cables
SKU: 5487FB8/45 -
CC3D EVO CopterControl Hardware Features
-
Flight Controller, Multirotor
kk2.1.5 lcd flight Control Board for fpv Racing
- Play online with your friends, get free games, save games online and more with PlayStation
- Cutting edge graphics bring game worlds to life like never before, and next gen
- Connect with your friends to broadcast and celebrate your epic moments
- Perfect for both new players and players new to PS4
SKU: 5487FB8/40 -
Brushless Motors, Multirotor
A2212 KV2200 Brushless Motor For RC Airplane / Quadcopter
Description:
Item Name: A2212 KV2200 Brushless Motor
Item NO.: A2212
Dimensions: 27.5 x 30mm
Max Efficiency: 80%
Max Efficiency Current: 4-10A (>75%)
Current Capacity: 12A/60s
No. Of Cells: 2-3 Li-Poly
Weight: 47g
KV: 2200Package Included:
1 x A2212 KV2200 Brushless Motor
1 x motor mount
1 x clip
4 x screwSKU: n/a
There are no reviews yet.